Nowadays, timber is widely used in construction industry thanks to its availability and good properties. The use of solid (sawn) timber is not always proper since it is only available up to certain dimensions. Therefore, the so-called Engineered Wood Products (EWPs) have been introduced tocope with the different design needs of structures.
(Mechanical Project) Automatic Trimmerhead
Automatic trimmerhead is an examination project for making an automatic trimmerhead for grass trimmers with the user and functionality in focus. Our perception is that a happy user is a user who can pick up his or her trimmer, use it and put it back to its place when the job is done. It should not be necessary to interrupt work and perform maintenance on the machine just to make it work as promised.
(Management Project) The novelty of Open Innovation
Proponents of Open Innovation argue in support of its novel additions, critics however question its novelty and argue that the roots of Open Innovation predate Chesbrough. We investigate what is novel about Open Innovation by comparing predating theories and concept switch the main themes we found using a literature review.
(Computer Project) A Distributed Real Time Network based Intrusion Detection System
While the increased inter-connectivity of the computer networks has brought a lot of benefits to the people, it also rendered networked systems vulnerable to malicious attacks from the hackers. The failure of the intrusion prevention techniques to adequately secure computer systems has lead to the growth of Intrusion Detection System.
(Electronics Project) A Novel Liquid Antenna for Wearable Bio-monitoring Applications
The performance of the most commonly used metal antennas close to the human body is one of the limiting factors of the performance of bio-sensors and wireless body area networks (WBAN). Due to the high dielectric and conductivity contrast with respect to most parts of the human body (blood, skin,…), the range of most of the wireless sensors operating in RF and microwave frequencies is limited to 1-2 cm when attached to the body.
(Civil Project) Housing Development
The project consists in nine single-family detached houses with a residential activity building. This project is designed to suit the inhabitants who live in Halmstad. It includes green areas to walk, playing areas and gardens. However, for many months the weather in Halmstad is relatively cold, therefore, the project includes a common building where residents can play sports, relax, meet even sunbathe. This will enhance the status of the area.
(Management Project) Bottlenecks in the Freight Forwarding sector in West Coast Africa
Problem – The expansion of global trade and supply chain integration has put great emphasis on logistics, particularly in the intermediary sector, freight forwarders. Whilst in developed countries freight forwarders benefit from competitive markets and trade facilitating policies, this sector in West coast Africa exhibits low logistics performance levels.
(Mechanical Project) Hydraulic Regenerative System for a Light Vehicle
The project is based in a constructed light vehicle that must be improved by adding a hydraulic energy recovery system. This vehicle named as TrecoLiTH, participated in the Formula Electric and Hybrid competition (Formula EHI) 2009 in Italy -Rome- and won several awards.
(Computer Project) Properties of ‘Good’ Java Examples
Example programs are well known as an important tool to learn computer programming. Realizing the significance of example programs, this study has been conducted with a goal to measure and evaluate the quality of examples used in academia. We make a distinction between good and bad examples, as badly designed examples may prove harmful for novice learners.
(Electronics Project) Design Space Exploration Of Field Programmable Counter Arrays And Their Integration With FPGAs
Field Programmable Counter Arrays (FPCAs) have been recently introduced to close the gap between FPGA and ASICs for arithmetic dominated applications. FPCAs are reconfigurable lattices that can be embedded into FPGAs to efficiently compute the result of multi-operand additions.
(Electrical Project) Robust Torque Control for Automated Gear Shifting in Heavy Duty Vehicles
In an automated manual transmission it is desired to have zero torque in the transmission when disengaging a gear. This minimizes the oscillations in the driveline which increases the comfort and makes the speed synchronization easier. The automated manual transmission system in a Scania truck, called Opticruise, uses engine torque control to achieve zero torque in the transmission.
(Computer Project) Automatic Java Code Generator for Regular Expressions and Finite Automata
Generalizing the common pattern of implementing Regular Expressions (RE) by converting them into a finite automaton that can be programmed, is the main idea of the Regular Expression Java Code Generator. Writing code that writes code has been introduced in Lisp, but taking this into a higher level by introducing the possibility to execute, and modify the written code is the main aim of this project. A “compiler” for regular expressions is useful to turn the expressions we write into executable code.
(Mechanical Project) Feasibility Study of Heat Driven Cooling Based Thermal Energy Storage
Human needs are unlimited, but resources are limited to satisfy these needs. Because of this reason, consideration of sustainability in utilization of energy is of immense importance. As an intelligent species, mankind is interested in satisfying their needs sustainably. In this view, use of renewable energy, reduction of energy usage, and reduction/ elimination of use of fossil fuels are of great importance.
(Management Project) Analyzing the Disruption Factors of Emerging Markets
A free and flexible business environment attracts international organisations to those markets that have big growth potential and high profit margins. To penetrate emerging markets is of great interest to any international organisation. The situation gets more intense if it is in the field of telecommunications. Telecommunications (telecoms) and information technology (IT) are generically known as the information and communication technologies (ICT) industries.
(Civil Project) FEM Modeling of Concrete Gravity Dams
This project is an analysis of two different concrete gravity dams. One of the dams, the Baozhusi Hydropower Station, is a fully functional concrete gravity dam situated in the Sichuan province in the Peoples Republic of China. This dam reopened again after its upgrading, which was finished in 1998.
All India Exams for B.Tech/B.E/MBBS/Pharmacy/GRADUATES
All India Exams for B.Tech/B.E/MBBS/Pharmacy/GRADUATES
| Post Date | Recruitment Board | Post Name | Qualification | Advt No | Last Date | More Information |
| 05/09/2012 | IIT Bombay | RA, Jr Technical Asst – 11 Posts | ITI/Diploma, B.E, B.Sc/M.Sc (Chemistry) | . | 28/09/2012 | Get Details.. |
| 05/09/2012 | HLL Life Care Limited | Dy, Sr Manager, Chief Project Managers | B.E/B.Tech | . | 24/09/2012 | Get Details.. |
| 05/09/2012 | GAIL India Limited | Executive Trainees through GATE 2013 | B.E/B.Tech | . | 15/01/2013 | Get Details.. |
| 05/09/2012 | Rashtriya Chemicals & Fertilizers Ltd | Technician Trainee – 58 Posts | SSC with ITI, Diploma (Engg) | . | 20/09/2012 | Get Details.. |
| 05/09/2012 | Indian Statistical Institute, Kolkata | Various Vacancies – 10 Posts | HSC, Any Degree with Diploma/CA/ICWA, PG | . | 01/10/2012 | Get Details.. |
| 05/09/2012 | NHPC Limited | Engineer, Jr Engineer (Electrical) – 41 Posts | Diploma, B.E/B.Tech | No. Rectt./01/2012 | 17 to 26/09/2012 – Walk in | Get Details.. |
| 05/09/2012 | RITES Limited | Assistant (Accounts) – 20 Posts | B.Com/BBA (Finance) | . | 29/09/2012 | Get Details.. |
| 05/09/2012 | Neyveli Lignite Corporation Ltd | Senior, Junior Residents – 32 Posts | MBBS with PG Diploma/Degree | 07/2012 | 15/09/2012 – Walk in | Get Details.. |
| 04/09/2012 | National Institute of Oceanography, Goa | Project Assistant I, II, III – 09 Posts | M.Sc, M.Tech | . | 13 to 28/09/2012 – Walk in | Get Details |
| 04/09/2012 | Navsari Agricultural University | SRF, Technical, Lab, Field Assts – 14 Posts | Diploma/B.Sc/M.Sc (Agriculture) | . | 15/09/2012 – Walk in | Get Details |
| 04/09/2012 | PGCIL | Executive Trainees (Electrical) through Gate 2013 | B.E/B.Tech/B.Sc (Engg) | 05/2012 | 08/02/2013 | Get Details |
JNTU-HYD : B.Tech / B.Pharmacy I Mid Exams Scheduled on 4th September Are Postponed to 6th Sept 2012
JNTU-HYD : B.Tech / B.Pharmacy I Mid Exams Scheduled on 4th September Are Postponed to 6th Sept 2012
ON MONDAY, SEPTEMBER 3, 2012
The B.Tech/B.Pharmacy I Mid Exams Scheduled on 4th September 2012 Are postponed to 6th September 2012. There is no change in timings of exams.
Download Previous Mid Exam Bit Papers Here
Download Study Materials/Notes Here
Download Previous Mid Exam Bit Papers Here
Download Study Materials/Notes Here
(Civil Project) Optimization of Best Management Practices for Watershed Planning
Increases in nutrient loading are an on-going problem in many watersheds including the Chesapeake Bay watershed. Best management practices (BMPs) are used to reduce loadings to watershed tributaries. However, budget constraints often make determining the most effective nutrient load reducing BMP set a complex task.
(Management Project) Corporate Social Responsibility(CSR): Structure for Responsibility
Many organisational flaws are consequences of unsuitable structure arrangements that do not support the organisation in its work towards goal accomplishment. The appropriateness of the structure is determined by how well it allows the organisation to respond to the environment in which it is active. Furthermore, an organisation is divided into parts with their own requirements on the structure.
(Mechanical Project) Analysis of the Z-wing configuration
This project will analyze the Z-wing configuration. The Z-wing configuration is basically an airplane that has one of the wings placed at the forward section of the fuselage and the other wing placed on the other side far aft at the fuselage.
(Computer Project) Efficient content distribution in IPTV environments
Existing VoD solutions often rely on unicast to distribute content, which leads to a higher load on the VoD server as more nodes become interested in the content. In such case, P2P is an alternative way of distributing content since it makes better use of available resources in the network. In this report, several P2P structures are evaluated from an operators point of view.
(Electronics Project) Indoor Positioning at Arlanda Airport
Recent years have witnessed remarkable developements in wireless positioning systems to satisfy the need of the market for real-time services. At Arlanda airport in Stockholm, LFV – department of research and developement wanted to invest in an indoor positioning system to deliver services for customers at the correct time and correct place.
(Electronics Project) Modeling Bus Load on CAN
The existence of high load and latency in the CAN bus network would indeed lead to a situation where a given message crosses its deadline; this situation would disturb the continuity of the required service as well asactivating fault codes due to delay of message delivery, which might lead to system failure.
(Computer Project) Granode – A proposal for a new game design tool
When creating computer games it is necessary to use extensive documentation so that everybody involved in the creative process is up to date. This paper has investigated what prospects there are to improve the GDD process to a more updated version that would be less linear in its format and more user-friendly to everybody involved.
(Mechanical Project) Improvement of finite element spot weld models for structural dynamics
The ACM 2 spot weld model is the currently most widely used spot weld model in industry. It is designed to be tuned using parameters to represent the stiffness characteristics of a spot weld in a suitable way. The choice of these parameters is however often associated with uncertainties.
(Management Project) Analysis and Actions for Robust Electronics Production at Haldex Brake Products Ltd
This report contains information about a project carried out at Haldex Brake Products that is situated in Redditch England. The Redditch site is part of the “Commercial Vehicle Systems” division within the Haldex group. Haldex Brake Products is designing and producing electronic anti lock brake systems. The latest product is called GEN2 and the project goal was to increase productivity and achieve more stability within the production processes of this product.
Subscribe to:
Posts (Atom)
