Nowadays, timber is widely used in construction industry thanks to its availability and good properties. The use of solid (sawn) timber is not always proper since it is only available up to certain dimensions. Therefore, the so-called Engineered Wood Products (EWPs) have been introduced tocope with the different design needs of structures.
The Glued laminated Timber (glulam) is a type of EWPs that consists of smallsections of timber laminates glued together to form beams and columns. Glulam can be manufactured in almost any size and shape; it can also be tapered or notched. However, notching a beam at its end leads to a stress concentration at the re-entrantcorner of the notch due to the sudden change in the notched beam’s cross section. The concentration of shear and tensile stresses perpendicular to the grain can lead to a catastrophic brittle failure caused by the crack propagation from the notch corner.
Crack opening due to tensile stresses perpendicular to grain is the most common failure at the notch corner and it is always taken into design consideration. However,shear component is usually exists and must be also considered in design to guarantee the safety of the structure. Currently, only the normal forces perpendicular to the beam’s axis are considered in the design of the reinforcement in design handbooks. The aim of this thesis was to study the structural behavior of notched glulam beams reinforced by adhered plywood panels and FRP. The carrying capacity of the notched glulam beams at their ends is the main subject of this project.
Source: Halmstad University
Author: Axenskär, Christian | Winde, David
Source: Halmstad University
Author: Axenskär, Christian | Winde, David
No comments:
Post a Comment