(Electronics Project) Dynamic System Identification of a Strainfield

To be able to monitor forces acting on objects is important for a lot of different applications. In this case the object is a big steel disc and the forces to be monitored are those acting on the rim of the disc.

This is done with strain gauges that register changes in the internal strainfield. This is then run through a system model that outputs the equivalent force for that strainfield. The system model is created through a static system identification consisting of a series of test pushes on the rim of the disc. This method of system identification has a series of problem mainly that it is time consuming.

(Electronics Project) Design of Small Photovoltaic(PV) Solar-Powered Water Pump System

The intent of this technical publication is to provide general guidance on the design of small solar-powered water pump systems for use with livestock operations or irrigation systems. This document provides a review of the basic elements of electricity, a description of the different components of solar-powered water pump systems, important planning considerations, and general guidance on designing a solar-powered water pump system.

(Electronics Project) A Novel Liquid Antenna for Wearable Bio-monitoring Applications

The performance of the most commonly used metal antennas close to the human body is one of the limiting factors of the performance of bio-sensors and wireless body area networks (WBAN). Due to the high dielectric and conductivity contrast with respect to most parts of the human body (blood, skin,…), the range of most of the wireless sensors operating in RF and microwave frequencies is limited to 1-2 cm when attached to the body.

(Electronics Project) Design Space Exploration Of Field Programmable Counter Arrays And Their Integration With FPGAs

Field Programmable Counter Arrays (FPCAs) have been recently introduced to close the gap between FPGA and ASICs for arithmetic dominated applications. FPCAs are reconfigurable lattices that can be embedded into FPGAs to efficiently compute the result of multi-operand additions.

All India Exams for B.Tech/B.E/MBBS/Pharmacy/GRADUATES

All India Exams for B.Tech/B.E/MBBS/Pharmacy/GRADUATES

Post Date	Recruitment Board	Post Name	Qualification	Advt No	Last Date	More Information
05/09/2012	IIT Bombay	RA, Jr Technical Asst – 11 Posts	ITI/Diploma, B.E, B.Sc/M.Sc (Chemistry)	.	28/09/2012	Get Details..
05/09/2012	HLL Life Care Limited	Dy, Sr Manager, Chief Project Managers	B.E/B.Tech	.	24/09/2012	Get Details..
05/09/2012	GAIL India Limited	Executive Trainees through GATE 2013	B.E/B.Tech	.	15/01/2013	Get Details..
05/09/2012	Rashtriya Chemicals & Fertilizers Ltd	Technician Trainee – 58 Posts	SSC with ITI, Diploma (Engg)	.	20/09/2012	Get Details..
05/09/2012	Indian Statistical Institute, Kolkata	Various Vacancies – 10 Posts	HSC, Any Degree with Diploma/CA/ICWA, PG	.	01/10/2012	Get Details..
05/09/2012	NHPC Limited	Engineer, Jr Engineer (Electrical) – 41 Posts	Diploma, B.E/B.Tech	No. Rectt./01/2012	17 to 26/09/2012 – Walk in	Get Details..
05/09/2012	RITES Limited	Assistant (Accounts) – 20 Posts	B.Com/BBA (Finance)	.	29/09/2012	Get Details..
05/09/2012	Neyveli Lignite Corporation Ltd	Senior, Junior Residents – 32 Posts	MBBS with PG Diploma/Degree	07/2012	15/09/2012 – Walk in	Get Details..
04/09/2012	National Institute of Oceanography, Goa	Project Assistant I, II, III – 09 Posts	M.Sc, M.Tech	.	13 to 28/09/2012 – Walk in	Get Details
04/09/2012	Navsari Agricultural University	SRF, Technical, Lab, Field Assts – 14 Posts	Diploma/B.Sc/M.Sc (Agriculture)	.	15/09/2012 – Walk in	Get Details
04/09/2012	PGCIL	Executive Trainees (Electrical) through Gate 2013	B.E/B.Tech/B.Sc (Engg)	05/2012	08/02/2013	Get Details

(Electronics Project) Indoor Positioning at Arlanda Airport

Recent years have witnessed remarkable developements in wireless positioning systems to satisfy the need of the market for real-time services. At Arlanda airport in Stockholm, LFV – department of research and developement wanted to invest in an indoor positioning system to deliver services for customers at the correct time and correct place.

(Electronics Project) Modeling Bus Load on CAN

The existence of high load and latency in the CAN bus network would indeed lead to a situation where a given message crosses its deadline; this situation would disturb the continuity of the required service as well asactivating fault codes due to delay of message delivery, which might lead to system failure.

(Management Project) Analysis and Actions for Robust Electronics Production at Haldex Brake Products Ltd

This report contains information about a project carried out at Haldex Brake Products that is situated in Redditch England. The Redditch site is part of the “Commercial Vehicle Systems” division within the Haldex group. Haldex Brake Products is designing and producing electronic anti lock brake systems. The latest product is called GEN2 and the project goal was to increase productivity and achieve more stability within the production processes of this product.

(Electronics Project) Multilevel Power Estimation Of VLSI Circuits Using Efficient Algorithms

New and complex systems are being implemented using highly advanced Electronic Design Automation (EDA) tools. As the complexity increases day by day, the dissipation of power has emerged as one of the very important design constraints. Now low power designs are not only used in small size applications like cell phones and handheld devices but also in high-performance computing applications.

Electronics Mini Project Topics and Ideas

1. 4 Digit 7-Segment Multiplex DISPLAY
2. Automatic Light Beam Shifting Of Vehicles On High Ways
3. Automatic Speed Regulation Depending On Incoming Vehicle On High Ways(Fuel Injection)
4. Automatic Light Lamp with Morning Alarm
5. Automatic Exhaust Fan Control Coupled To Gas Leak Detection
6. Auto turn off battery charger
7. Anti Theft Alarm For Bikes
8. Automatic Heat Detector

(Electronics Project) DC Motor Speed Control Using Microcontroller PIC 16F877A

Direct current (DC) motor has already become an important drive configuration for many applications across a wide range of powers and speeds. The ease of control and excellent performance of the DC motors will ensure that the number of applications using them will continue grow for the foreseeable future.

(Electrical/Electronics Project) Design of PM Generator for Avertical Axis Wind Turbine

The task in this project is to design a generator for a vertical axis wind turbine with power rated to 20kW at a wind speed of 10m/s. The design has just a few moving parts, which decreases maintenance costs and increases its toughness. The turbine absorbs wind from every direction but its rotation speed ratio is lower than horizontal axis wind turbines.

(Electronics Project)Radio Communication for PIE – a Tiny Timber Interface

Tiny Timber is a very lightweight, real-time kernel for small, event-driven embedded systems.  It implements reactive objects as a way of structuring embedded software. These objects are components that react to incoming events by updating their internal state and issuing an outgoing event.

(Electronics Project) Assembly of a UAV (Unmanned Aerial Vehicle): hardware design of a UAV

This project is dedicated to assemble the hardware system of a UAV (Unmanned Aerial Vehicle) in order to prepare the platform for an autonomous flight in the air for a given path through the pre-programmed check points. A UAV is an aircraft that contains sensors, GPS, radio system, servomechanisms and computers, which provide the capability of an autonomous flight without a human pilot in the cockpit.

(Electrical/Electronics Project) Low Noise Amplifier for Radio Telescope at 1: 42 GHz

This is a part of the project “Radio telescope system” working at 1.42 GHz, which includes designing of patch antenna and LNA. The main objective of this project is to design a two stage low noise amplifier for a radio telescope system, working at the frequency 1.42 GHz. Finally our aim is to design a two stage LNA, match, connect and test together with patch antenna to reduce the system complexity and signal loss.

(Electronics/Electrical Project) Implementation of MIMO-OFDM System for WiMAX

Error free transmission is one of the main aims in wireless communications. With the increase in multimedia applications, large amount of data is being transmitted over wireless communications. This requires error free transmission more than ever and to achieve error free transmission multiple antennas can be implemented on both stations i.e. base station and user terminal with proper modulation scheme and coding technique. The 4th generation of wireless communications can be attained by Multiple-Input Multiple-Output (MIMO) in combination with Orthogonal Frequency Division Multiplexing (OFDM).

(Computer/Electronics/Mechanical Project) Seam Tracking in a Complex Aerospace Component for Laser Welding

This project is a result of collaboration between the University of Trollhättan/Uddevalla and Volvo Aero Corporation, Trollhättan. An aerospace component, which is used in a process at Volvo Aero Corporation, is casted in one piece. A new way of manufacturing thiscomponent is under investigation.

(Electronics Project) Pre-study of new Electrical Coupling between Train Cars

This study is meant to be an initial study of the possibility to replace the discrete control signal wires over the electrical coupler between train cars with a data bus system. The reason for this is that the electrical coupler is large and heavy due to the high amount of contacts it contains.

It is also a problem for manufacturers who are upgrading an existing fleet and need to transfer more signals through a coupler with no spare contacts to use. Except the control signals there are also Ethernet and power signals in the electrical coupler. Some trains also use a bus system for control signals and/or signals containing a large amount of data such as passenger information.

This report gives a presentation of some common ways to distribute electrical signals throughout a train used by most manufacturers. It also presents some design recommendations for a system that would collect existing signals to a bus system and two different design proposals that should be considered if such a system is to be developed.

(Electronics Project) Application of Porous Silicon in Terahertz Technology

In this study, we discuss our efforts in developing porous silicon based devices for terahertz signal processing. In the first stage of our research, we demonstrate that porous silicon samples fabricated from highly doped p-type silicon can have adjustable refractive indices ranging from 1.5-2.1 and can exhibit a resistivity that is four orders of magnitude higher than that of the silicon wafer from which they were made.

(Electronics Project) Experimental Study of Cu2ZnSnS4 thin films for Solar Cells

Cu2ZnSnS4 (CZTS) is a semiconductor with a direct band gap of about 1,5 eV and anabsorption coefficient of 10^4 cm^-1, and is for this reason a potential thin film solarcell material. Demonstrated efficiencies of up to6,8% as well as use of cheap andabundant elements make CZTS a promising alternative to current solar cells.